500L micro craft beer brewery equipment system in Labo Du Brasseur.

We are honored supplied one set completely 500L micro craft beer brewery equipment system in Labo Du Brasseur. Le Labo du Brasseur is a Bar-Microbrewery located less than 100m from the beach. All draft beers are brewed on site in the laboratory at the back of the bar. Come and discover their 8 styles of beers – 100% local & artisanal.

Micro beer brewery equipment brewhouse design.

Mash/kettle tank specifications.

* Total volume: 680L, Effective volume:500L,

* Inside surface: SUS304, Thickness：3mm
Outside surface: matte polishing stainless steel, Thickness：2mm; Thermal insulation material: 80mm rock wall.

* Materials: Stainless steel 304

* Heating mode: Steam jacket

* Feeding mode: sealed pump in and out design, mash pump adopts high power and low speed.

* Manhole mode: normal pressure glass manhole at the top.

* Temperature measurement method: PT100 temperature probe

* Cleaning method: CIP Fixed rotate cleaning ball and sparage coil. top manhole,

* With:thermometer, glass level all necessary valves and fittings;

* Stainless steel legs, with screw assembly to adjust leg height.

* Matching valve accessories

* Process: TIG welding, no welding dead, fluid quality assurance.

* Mixing device inside, which is connected with a horizontal reducer for ploughing. VFD control.

* The manhole is out of the side.

* Level gauge

Lauter tank&whirlpool tank specifications.

* Total volume: 680L, Effective volume:500L,

* Inside surface:  SUS304, Thickness：3mm

Outside surface: matte polishing stainless steel, Thickness：2mm; Thermal insulation material: 80mm rock wall.

* Materials: Stainless steel 304

* Manhole mode: normal pressure glass manhole at the top.

* CIP cleaning spay ball and spray ring pipe.

* Ploughing knife device inside, which is connected with a horizontal reducer for ploughing. VFD control. Raker with reversed can can automatic grain spent.

* Mill sieve plate with 0.75mm upper hole diameter and 3mm bottom hole opening rate of 12%

* Surface protection, weld slinging band with stainless steel leg, adjustable bolt to adjust leg height;

* The necessary parts of valve, processing technical

*Argon arc welding, No welding corner to ensure the quality of the fluid,

* Feed in and out: pump out, mash pump with high power and low speed.

* Level gauge.

Micro beer brewery equipment equiped fermentation tank.

* Effective Capacity: 500L; Total Capacity: 625L.
* Interior Shell: SUS304 full welded; TH=3mm.
* Exterior Shell:SUS304 full welded; TH=2mm.
* 100% TIG welding with pure argon gas shield.
* Interior Finish: Sanitary 2B finish, Pickled and Passivated.
* Exterior Finish: Oil brushed finish.
* Interior full polished to 0.2~0.4 μm without dead corner.
* Insulated with high density Polyurethane foam; TH=80mm.
* Glycol Jacket: Dimpled plate on cone and side.
* Stringent tank leakage test by water and pressured gas.
* Dished head and 60 degree cone bottom.
* Sanitary side mounted manway with pressured door.
* Tri-clamp connected CIP arm with 360° coverage spraying ball.
* Full sanitary metallic sealed mechanical pressure relief valve and hydraulic shock pressure gauge.
* Rotating racking arm and port on cone with butterfly valve.
* Tri-clamp discharge arm with butterfly valve.
* Thermowell for high accuracy temperature sensor.
* Sampling valve and pressure vacuum relief valve equiped.
* 4 pieces completely SUS304 heavy duty legs with leveling pad and legs support.
* Complete valves, fittings and all parts Dry hopping port 4” TC with solid end cap.