CIP System

Standard Configuration

The function of the CIP system is to automatically clean the surfaces in contact with all products. The cleaning objects include the inner wall of the tank, the inner wall of the pipeline, the inner wall of the liquid tank and other liquid channels.The key process parameters of the CIP system are the type, concentration, temperature, and flow rate of the cleaning solution. The alkaline solution is usually NaOH. The acid solution is usually nitric acid or phosphoric acid, with a concentration of 1-3%. It should be properly heated and the cleaning flow rate should be between 1.5-3m / s.There are usually three cleaning fluid storage tanks: acid tank, lye tank, and hot water tank. According to the different cleaning objects, it can be divided into single circuit, dual circuit, and multi-circuit. Automatic CIP system The metering and adding of concentrated acid and alkali, the temperature of the cleaning liquid are automatically controlled, and the cleaning program is automatically executed after the setting.

Technical Parameters

Equipments Reques	Components
1.Milling Unit	Particle adjustable rolling crusher
1.Milling Unit	Flexible or steel auger to directly lift the milled grain to mash tun
2.Brewhouse Unit	Mash tun, Lauter tun, Boiling Kettle, Whirlpool tun in various combination
	Hot water tank and cold water tank for optional in special combinations
	Infusion or decoction brewing methods are designed exactly
	tainless steel are popular because of easy maintenance and clean, copper cladding for optional
	Two stages or single stage heat exchanger for wort cooling
	Completely stainless steel integrated work platform
	Sanitary and efficiency wort pump
	All pipings and fittings
3.Fermentation Unit	Standard stainless steel conical cylindrical fermentation tanks
	Single size or double size as brewhouse is common used in microbreweries
	Tanks quantity is exactly calculated by fermentation cycle for various beers
	All manhole, valves, pressure gauges, fittings etc are included
4.Cooling Unit	Efficiency chillers or refrigerators with fryon to supply cooling energy
	Insulated glycol water tank with or without copper coil for glycol liquid holding and mixing
	Sanitary centrifugal pump for glycol water recycle among tanks and heat exchanger
	All pipes, fitting, insulation materials are included
5.Beer Filter Unit	Plate-Frame or Candle type DE (diatomite earth) filter is used for clarify the beer
5.Beer Filter Unit	Craft beer is no need filtration which will keg filling for quickly consumptio
6.Bright Beer Tank Unit	Standard stainless steel bright tanks for beer maturation, conditioning, service, carbonation
	Single size or double size as fermenter is common used in restaurant or bar
	Tanks quantity is exactly calculated for various beers and the function
	All manhole, valves, stone, gauges, fittings etc are included
7.Controlling Unit	Electrical controlling cabinet with temperature, on-off controlling for brewhouse
	Temperature controller, thermocouple, solenoid valves etc are included
	Electrical controlling cabinet with temperature, on-off controlling for cooling parts
	PLC with touch screen panel for special request
8.Beer Dispense	Keg filling and rinsing machine
	Semiauto bottling machine with rinsing, filling, capping, labeling etc
	Flash pasteurizer or tunnel pasteurizer is available
9.Other Facilities	Portable or fixed CIP system for cleaning the tanks
	Steam boiler for brewhouse heating
	Water treatment for brew water
	Oil free air compressor

Process introduction

Process Brief

stainless steel fermenters can be individually temperature controlledthrough glycol jackets and are mostly equipped with accessories such as pressure relief valve, CIPcleaning jet, sanitary sample valve, manhole,etc. The design of Tiantai fermenter is based on our vast beer knowledge and especially the conicafermentebottom and the fact that we combine fermentation and maturation in the same vessel is very important.This system adopt the PLC program to control, with the colored touch screen to operate and display the whole process flow and also the each controlling parameter. The temperature of the cleaning liquid canbe installed. It can set the PH value , the cleaning time, cleaning sequence , and alsothe refluence PH value. With the system malfunction alarmdevice.The heating way for the cleaningliquid is auto-heating. The operating principle: set the cleaning temperature through the temperaturecontroller to control the steam control valve’s opening frequency to limit the steam amount making thecleaning liquid keep at needed temperature.All the tanks liquid level in the CIP system with auto-alarm.

FAQ

1Q: Are you a manufacturer or trading company?

A: We are a professional manufacturer.

2Q: How could we confirm the details of the products?

A: We will provide all the drawings for you to confirm before production.

3Q: How long the warranty will be?

A: 3 years warranty for the whole tank and the main equipment, 1 year for the accessories and auxiliaries.

4Q: How about the installation?

A: We can supply the installation. There are two options.
The first option: We could appoint our engineer to your company to debug and repair, as for the cost of this trip such as ticket, visa, accommodation and labor cost shall be on your side. The second option. On-line service will be provided. If still under guarantee period, the necessary accessories and parts will be provided free, but the transportation cost of it shall be on you side.

5 Q: How do you guarantee the filling machine operation?

A:before out of factory, we will test thefilling equipment with beer.

Our company